Tattu 14000mAh 8S1P 29.6V 95C FPV Lipo Battery Pack with QS8 Plug

This battery is designed for larger 8S FPV platforms where endurance and payload capability matter more than minimum battery weight. It is suitable for 10-18 inch long-range FPV drones, cinelifters, aerial filming platforms, inspection drones, and other high-power custom builds.

The 14000mAh capacity provides 414.4Wh of nominal energy while keeping battery weight lower than larger 17000-24000mAh packs. This can provide a useful balance between flight endurance, payload margin, and total takeoff weight.

The Tattu TA3200 6-14S dual-channel smart charger is a suitable option. Select the standard 8S LiPo charging mode and verify the battery voltage and charging settings before starting a charge.

This battery uses a QS8 main connector with 6 AWG discharge wires and a JST-XH balance connector. Check that your aircraft power system and wiring are compatible before installation.

Choose based on required flight time, payload, propulsion efficiency, and allowable takeoff weight. A larger battery provides more energy, but the additional weight can reduce efficiency, so the highest-capacity pack is not always the best option.